Alpaca Scarf - Start to Finish

My goal for this scarf project was to see if I would be happy spinning and knitting with a single ply yarn. My thoughts have always been that a single would slant and perhaps even fall apart.
I started with a couple year's growth of white alpaca fleece from the handsome Target who lives with Chris and Jenn in St. Louis, Michigan.

To Target's fleece I added a few pounds of white merino that I purchased from the McMurrays' who have the shop Genopalette on Etsy. They always provide me with the most awesome, clean sheep fleece imaginable.
So below is little Max with this huge bag of top beautifully processed at Zeilingers' in Frankenmuch, Michigan.

I dyed up a few pounds of the top in my crock pot and have some still listed in my shop (This isn't the same dye lot as my scarf)

I spun 2.6 ounces of the dyed top rather tight for me. I was really afraid it would fall apart, but I didn't need to worry. I washed the yarn in hot water and agitated it a little so that it would felt some. It did just that, stayed together, but retained its lovely softness.

....and here, TA,DAHHHHHH, is my scarf.

It is for sale in my shop here if you want to look more.
In conclusion - YES! I will continue to knit with a single ply yarn, but I will probably always worry about the possibility of a slant - probably never doing a vest or sweater, anything large....

Alpaca - Merino Top from the Mill

Yesterday I ran over to Frankenmuth, MI, to Zeilingers to pick up some fiber that I left in March. I love going over there because they are always so helpful and treat me so well....They make me feel special even though I'm only bringing them a hundred or so pounds of fiber each year - compare that to the thousands of pounds of buffalo that they do.
Anyway, I'm so pleased!!!! I will just tell you about the white. The alpaca comes from Target who lives in St. Louis, MI, with Chris and Jenn at Diversified Alpacas. He's a very handsome herd sire with lovely fleece who we are hoping to breed to my Ariana.

I had left Zeilingers a little over 10 pounds of 75% Target and 25% white merino from Genopalette's lambs. Gary suggested that I have it made into topp instead of roving like I have always done in the past. This picture → is the pound of noils left over that might be considered trash. I can imagine it in an awesome bed for Max or Cassie.

Speaking of Max, here he is posing for you so that you can see what 8 pounds of top looks like. I had a treat in my hand to get him to stay.

I love the way the fiber is coiled around. Looking down into the bag → is like looking into a tornado. I'm really anxious to spin some of this because it's so soft and smooth. When I pull it apart it is about 4 inches long which makes me think it's going to practically spin itself.

I took the picture above to list this in my Etsy store. The picture on the right shows how I use my weaving warping frame to wrap the top and then band it with information like - weight, my stuff, and a picture of the alpaca who donated the fiber.

Note on the warping frame, I've used it only once to measure yarn for weaving. What a waste, but it works to put up roving and top.

NutriSystem update: I thought that I had all my food but the Schwann's truck dropped off a bunch of frozen stuff today. I had a veggie pizza and an ice cream bar for lunch. They were yummy.

I started the program last Monday and have lost 3 pounds. This is amazing because I'm eating constantly.

I was just looking up how to spell top or topp, and came across the neatest little FAQ - How to tell if the fiber is roving or top? Pull the fiber apart. Top pulls apart in a straight line; roving leaves a rough, triangular-shaped edge.

Alpaca Fleece to Zeilinger's Mill in Frankenmuth, MI

Yesterday we delivered 42 pounds of fleece to Zeilingers in Frankenmuth, MI, to be made into four batches of roving. If you haven't been to their mill, you are missing a super treat. When I go back to pick up my lovelies, I will try to remember my camera so that I can give you a tour. Gary has always been there to greet me at the door, help reweigh the fleeces, offer advice, and answer any questions that I have. I had 4 batches to be blended which I'm going to describe to you.
Blend # 1 - 11.3 pounds - 50% Merino, 49% Alpaca from Ana, pictured above, and 1 % Mohair.

I purchased the white Merino from Genopalette, McMurrys, this winter with this blend in mind. This picture is of their Merino lambs that they were kind enough to send to me. Notice the lambs tails haven't even been docked yet so they must be quite young.

The beautiful white mohair is from Edie, here in Michigan and her store SpinningMoonFarm. This is a picture of her little Ted born this spring.

Blend # 2 - 8.84 pounds - 35% Our BabyDoll Sheep fleece and 65% alpaca from Lady Belita and Celeste.

Blend # 3 - 9.28 pounds - 25% colored Merino from Genopalette and 75% brown alpaca from Sonata (pictured above) and Orion (you've met him here many times because of his school and 4-H adventures).

Blend # 4 - 13.3 pounds - 100% alpaca from the seconds (neck and hip fiber) of Ana & Pollux (WHITE), Luke, Orion, Polaris (BROWNS), and naughty Gunny (BLACK & GRAY). These colors will be added around each other in the roving. It's called a 3 way swirl.

Just in case anyone is interested in the finances involved here. The cost was $308.72 but Zeilingers offers a 10% discount if paid there by check, so it was actually $277.85.

♥ ♥ ♥

Now the anxiety of waiting 2 months for it to be finished. An incredible amount of time and energy goes into this final act of delivering fiber to the mills. I wake up at night thinking about what I want to do and spend hours on my deck going through each fleece, discarding vegetation, second cuts, and coarse fiber. Today is a little anticlimatic. It's sort of like getting the kid off to college the first time - the years of prep and worry and then just dropping him/her off. This analogy is an exageration, of course, but you get the idea.